The models in this section represent reproductions of the old Veron Kwik-Fix series of pre-decorated all balsa models. The models shown here along with the plan packages are a best attempt to reproduce the original series in their original form. Each plan package includes a scan of the original kit plan if it was available along with some building notes. All of the plans are in the Adobe PDF format. Each package contains multiple pages that are printed on U.S. legal size paper (8.5" x 14"). A link is provided with each model description to download the associated plan package.
WHEN PRINTING MAKE SURE THAT PRINT SCALING HAS BEEN TURNED OFF.
A description of the method used to print the parts directly on balsa is provided here. Just click on the link.
NOTE - A very good alternative to printing the parts for these models directly on balsa is to use T-shirt iron-on transfer paper. This material comes in 8 1/2" x 11" sheet size and works very well for transferring the drawn parts to balsa. A summary of the process for doing this is covered here. The major advantage of using this process is any printer can be used. To make it a bit easier to use iron-on transfer paper to create the full color parts for these models an alternate parts drawing package is provided. This drawing package has been laid out for 8 1/2" x 11" sheets and A4 size sheets. A link to the iron-on transfer package is provided in each model section of this page.
If you have access to a 3D printer, you will find some 3D print files for propellers here. The 7" prop is well suited for these models.
If you have access to any of the kits in this old series we would certainly appreciate scans of the kit contents so additional reproduction drawing packages can be created and added to this section of the web site.